Supero SUPERSERVER 5018A-TN4, User Manual

Page: 46 / 114

5-4
S
UPER
S
ERVER 5018A-TN4 User's Manual
5-4 Onboard Processor and Heatsink
The A1SAi-2750F features an embedded Intel® Atom
TM
SoC C2750, FCBGA 1283
8-core processor.
5-5 Installing Memory
Caution! Exercise extreme care when installing or removing DIMM modules to
prevent any possible damage.
How to Install SO DIMMs
1. Install the desired number of DIMMs into the memory slots, starting with
DIMMA1, then DIMMB1, then DIMMA2, then DIMMB2.
2. Position the SO-DIMM module's bottom key so that it aligns with the receptive
point on the slot.
3. Insert the SO-DIMM module vertically at about a 45 degree angle.
4. Press down until the module locks into place. The side clips will automatically
secure the SO DIMM module, locking it into place.
5. To Remove: Use your thumbs to gently push the side clips near both ends
away from the module. This should release it from the slot. Pull the SO DIMM
module upwards.
Memory Support
The A1SAi-2750F motherboard supports up to 64 GB of ECC DDR3-1600/1333
SO-DIMM memory. Check the Supermicro website for updates to memory support
and a list of memory modules that have been validated with the A1SAi-2750F
motherboard.