Supero SUPERSERVER 5018A-TN4, User Manual

Page: 58 / 114

5-16
S
UPER
S
ERVER 5018A-TN4 User's Manual
5-11 SATA Ports
SATA Port
Pin Definitions
Pin# Signal
1
Ground
2 SATA_TXP
3 SATA_TXN
4 Ground
5 SATA_RXN
6 SATA_RXP
7 Ground
Unit Identification LED
A rear UID LED indicator (LED7) is located
next to the Unit Identifier (UID) switch on the
I/O backplane. The front panel UID LED is
located at Pin 7 of the Front Control Panel at
JF1. Connect a cable to Pin 7 on JF1 for front
panel UID LED indication. When you press
the UID switch, both rear UID LED and front
panel UID LED Indicators will be turned on.
Press the UID switch again to turn off both
LED Indicators. These UID Indicators provide
easy identification of a system unit that may
be in need of service.
Note: UID can also be triggered via IPMI
on the motherboard. For more information
on IPMI, please refer to the IPMI User's
Guide posted on our Website @http://www.
supermicro.com.
UID LED Status
Color/State OS Status
Blue: On Windows OS Unit Identified
Blue:
Blinking
Linux OS Unit Identified
SATA Ports
There are six SATA 3.0 ports provided on
the motherboard. I-SATA0 and I-SATA1
are SATA 3.0 ports and I-SATA2-5 are
SATA 2.0 ports. See the table on the right
for pin definitions.