Supero SUPERSERVER 5016T-TB, User Manual

Page: 56 / 104

5-22
S
UPER
S
ERVER 5016T-TB User's Manual
SMBus to PCI Slots
Jumper Settings (JI
2
C1/JI
2
C2)
Jumper Setting Defi nition
JI 2 C1: Closed JI 2 C2:Closed Enabled
JI
2
C1: Open JI
2
C2: Open Disabled
5-11 Onboard Indicators
LAN1/2 LEDs
The Ethernet ports (located beside the
VGA port) have two LEDs. On each
port, one LED indicates activity while
the other LED may be green, amber
or off to indicate the speed of the
connection. See the table on the right
for the indication associated with the
connection speed LED.
LAN1/2 LED
(Connection Speed Indicator)
LED Color Defi nition
Off NC or 10 Mb/s
Green 100 Mb/s
Amber 1 Gb/s
BMC Enable/Disable
Jumper Settings (JBMC1)
Settings Defi nition
Pins 1-2 Enabled
Pins 2-3 Disabled
BMC Enable/Disable
The JBMC1 jumper allows the user
to enable or disable the BMC (Base-
board Management Control) chip and
the onboard IPMI connections. This
jumper is to be used together with the
IPMI settings in the BIOS. If this jumper
is set to enabled, please also enable
IPMI in the BIOS and vice versa. The
default position is on pins 1 and 2 to
enable BMC. See the table on the right
for jumper settings.
SMBus to PCI Slots
Jumpers JI
2
C1 and JI
2
C2 allow you to
connect the System Management Bus
(I
2
C) to the PCI slot. The default set-
ting is Open (Disabled.) Both jumpers
must be set to the same setting (JI
2
C1
controls the clock and JI
2
C2 controls
the data). See the table on the right
for jumper settings.