Supero SuperServer 5016I-MR, User Manual

Page: 56 / 114

5-4
S
UPER
S
ERVER 5016I-MR/5016I-MRF User's Manual
5-4 I/O Ports
The I/O ports are color coded in conformance with the PC 99 specifi cation. See
Figure 5-2 below for the colors and locations of the various I/O ports.
Figure 5-2. I/O Ports
5-5 Processor and Heatsink Installation
Caution: When handling the processor package, avoid placing direct pressure on the
label area of the fan.
Notes:
•
Always connect the power cord last and always remove it before adding, re-
moving or changing any hardware components. Make sure that you install the
processor into the CPU socket before you install the CPU heatsink.
•
If you buy a CPU separately, make sure that you use an Intel-certifi ed multi-
directional heatsink only.
•
Make sure to install the motherboard into the chassis before you install the
CPU heatsinks.
•
When receiving a serverboard without a processor pre-installed, make sure that
the plastic CPU socket cap is in place and none of the socket pins are bent;
otherwise, contact your retailer immediately.
•
Refer to the Supermicro web site for updates on CPU support.
1. Keyboard (Purple) 6. COM1 Port
2. PS/2 Mouse (Green) 7. VGA Port (Blue)
3. USB Port 0 8. LAN1
4. USB Port 1 9. LAN2
5. IPMI LAN Port*
1
2
3
4
5
6 7 8 9
*X8SIL-F only