Supero SuperServer 5016I-MR, User Manual

Page: 80 / 114

6-2
S
UPER
S
ERVER 5016I-MR/5016I-MRF User's Manual
Figure 6-2. Chassis Rear View
6-2 Control Panel
The control panel (located on the front of the chassis) must be connected to the
JF1 connector on the motherboard to provide you with system control buttons and
status indicators. These wires have been bundled together in a ribbon cable to
simplify the connection.
Connect the cable from JF1 on the motherboard to the control panel PCB (printed
circuit board). Make sure the red wire plugs into pin 1 on both headers. Pull all
excess cabling out of the airfl ow path. The LEDs inform you of system status. See
Chapter 3 for details on the LEDs and the control panel buttons. Details on JF1
can be found in Chapter 5.
Figure 6-1. Chassis Front View
USB Ports
Dedicated IPMI LAN
Port*
VGA Port
Keyboard/
Mouse Ports
COM1 Port Ethernet Ports
*Note: the dedicated IPMI LAN port is included on the 5016I-MRF only.