Supero SuperServer 5016I-MR, User Manual

Page: 23 / 114

Chapter 2: Server Installation
2-7
Figure 2-4. Installing the Server into a Rack: w/ Rackmount Kit
Installing the Server into a Telco Rack
To install the server into a Telco type rack, use two L-shaped brackets on either side
of the chassis (four total). First, determine how far the server will extend out the front
of the rack. Larger chassis should be positioned to balance the weight between front
and back. If a bezel is included on your server, remove it. Then attach the two front
brackets to each side of the chassis, then the two rear brackets positioned with just
enough space to accommodate the width of the rack. Finish by sliding the chassis
into the rack and tightening the brackets to the rack. See Figure 2-5.