Supero SuperServer 5015M-Ni, User Manual

Page: 43 / 108

Chapter 5: Advanced Serverboard Setup
5-9
5-6 Adding PCI Cards
1. PCI Expansion Slots
Two riser cards are used to support add-on cards to the system. The SC812L-280U
chassis can accommodate two standard (full-height full-length) and one low-profi le
PCI expansion cards.
PCI cards are installed into riser cards that have been pre-installed to the system.
See the confi guration list below.
2. PCI card installation
Before installing a PCI add-on card, make sure you install it into the correct riser
card. Begin by releasing the locking tab on the I/O backplane that corresponds to
the slot you wish to populate. Insert the expansion card into the correct riser card,
pushing down with your thumbs evenly on both sides of the card.
PCI Slot/Card Confi gurations
Riser Card Expansion card(s) supported
RSC-R1UU-2E8 2x PCI-E x8 cards
RSC-R1UU-E8R+ 1x PCI-Express x8 low-profi le card (with PCI-E x4 sig-
nal)