Supero SuperServer 5015M-Ni, User Manual

Page: 3 / 108

Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperServer 5015M-Ni. In-
stallation and maintenance should be performed by experienced technicians only.
The SuperServer 5015M-Ni is an economical, dual processor server based on the
SC812L-280U 1U rackmount server chassis and the PDSMU serverboard, which
supports Intel ® Xeon® 3000 Series, Pentium® D, Pentium Extreme Edition, Pentium
4, and Celeron D processors in an LGA775 Package at a Front Side (System) Bus
speed of 1066/667/533 MHz and up to 8 GB of unbuffered ECC/non-ECC DDR2-
667/533/400 SDRAM.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the SUPER PDSMU serverboard
and the SC812L-280U chassis, which make up the SuperServer 5015M-Ni.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 5015M-Ni into
a rack and check out the server confi guration prior to powering up the system. If
your server was ordered without processor and memory components, this chapter
will refer you to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
iii
Preface