Supero SUPERSERVER 5015M-MF, User Manual

Page: 54 / 120

5-18
S
UPER
S
ERVER 5015M-MR(+)/5015M-MF(+) User's Manual
System Power Force On
Jumper JPF allows you to enable or
disable the Force-Power-On function.
If enabled, system power will always
stay on. If disabled (the normal set-
ting), the user needs to press the power
button to power on the system.
System Power Force On
Jumper Settings
(JPF)
Jumper Setting Defi nition
Closed Force On
Open Disabled
JLAN2 Enable/Disable
Change the setting of jumper JPL2 to
enable or disable the JLAN2 Ethernet
port on the motherboard. See the
table on the right for jumper settings.
The default setting is enabled.
JLAN2 Enable/Disable
Jumper Settings (JPL2)
Jumper Setting Defi nition
Pins 1-2 Enabled
Pins 2-3 Disabled
I
2
C Bus to PCI
Jumpers JI 2 C1 and JI 2 C2 allow you
to connect the PCI/PCI-X slots to the
System Management (I 2 C) Bus. The
default setting is “Open” to disable the
connection. Both jumpers must be set
to the same setting. See the table on
the right for jumper settings.
I 2 C Bus to PCI
Jumper Settings
(JI
2
C1/JI
2
C2)
Jumper Setting Defi nition
Closed Enabled
Open Disabled
JLAN1 Enable/Disable
Change the setting of jumper JPL1 to
enable or disable the JLAN1 Ethernet
port on the motherboard. See the
table on the right for jumper settings.
The default setting is enabled.
JLAN1 Enable/Disable
Jumper Settings (JPL1)
Jumper Setting Defi nition
Open Enabled
Pins 2-3 Disabled