Supero SUPERSERVER 5015M-MF, User Manual, Page: 17 / 120

Chapter 2: Server Installation
2-1
Chapter 2
Server Installation
2-1 Overview
This chapter provides a quick setup checklist to get your SuperServer 5015M-MR(+)/
5015M-MF(+) up and running. Following the steps in the order given should enable
you to have the system operational within a minimal amount of time. This quick
setup assumes that your 5015M-MR(+)/5015M-MF(+) system has come to you with
the processor and memory preinstalled. If your system is not already fully integrated
with a motherboard, processor, system memory etc., please turn to the chapter or
section noted in each step for details on installing specifi c components.
2-2 Unpacking the System
You should inspect the box the SuperServer 5015M-MR(+)/5015M-MF(+) was
shipped in and note if it was damaged in any way. If the server itself shows dam-
age, you should fi le a damage claim with the carrier who delivered it.
Decide on a suitable location for the rack unit that will hold the SuperServer 5015M-
MR(+)/5015M-MF(+). It should be situated in a clean, dust-free area that is well
ventilated. Avoid areas where heat, electrical noise and electromagnetic fi elds are
generated. You will also need it placed near a grounded power outlet. Read the
Rack and Server Precautions in the next section.
2-3 Preparing for Setup
The SuperServer 5015M-MR(+)/5015M-MF(+) does not ship with a rack rail hard-
ware package as the system can be rack mounted without the use of rails. An
optional rack rail package is available if you wish to order from Supermicro. Follow
the steps in the order given to complete the installation process in a minimal amount
of time. Please read this section in its entirety before you begin the installation
procedure outlined in the sections that follow.