Supero SUPERSERVER 5015B-M3, User Manual

Page: 3 / 96

Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It pro-
vides information for the installation and use of the SuperServer 5015B-M3. Instal-
lation and maintainance should be performed by experienced technicians only.
The SuperServer 5015B-M3 is a high-end single processor 1U rackmount server
based on the SC813MTS-280C server chassis and the X7SB3 motherboard. The
X7SB3 supports a single Intel
®
Xeon
®
3000 Series processor at system bus
speeds of 1333/1066/800 MHz.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the Super X7SB3 motherboard
and the SC813MTS-280C chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 5015B-M3 into
a rack and check out the server confi guration prior to powering up the system. If your
server was ordered without the processor and memory components, this chapter will
refer you to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer to this chapter for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
iii
Preface