Supero SuperServer 5014C-M8, User Manual

Page: 54 / 110

5-18
S
UPER
S
ERVER 5014C-M8 User's Manual
USB Wake-Up
Use JPUSB to enable or disable
USB Wake-Up, which allows you
t o w a k e u p t h e s y s t e m b y d e -
pressing a key on the keyboard or
by clicking the mouse when either
is connected to the USB1 or USB2
port (only). Enable the jumper to al-
low the system to be woken up from
an S1 or S3 state in Windows OS.
See the table on the right for jumper
settings. This feature works with the
USB1 and USB2 ports only.
Jumper
Position
Pins 1-2
Pins 2-3
Definition
Disabled
Enabled
USB Wake-Up
Jumper Settings
(JPUSB)
Keyboard Wake-Up
The JPWAKE1 jumper is used to
allow the system to be woken up
by depressing a key on the key-
board from an S1 or S3 state in
Windows OS. See the table on
the right for jumper settings. Your
p o w e r s u p p l y m u s t m e e t A T X
specification 2.01 or higher and
supply 720 mA of standby power
to use this feature.
Jumpe
r
Position
Pins 1-2
Pins 2-3
Definition
Disabled
Enabled
Keyboard Wake-Up
Jumper Settings
(JPWAKE1)
SCSI Enable/Disable
The JPA1 jumper allows you to en-
able or disable the onboard SCSI.
The normal (default) position is with
pins 1 and 2 jumped to enable SCSI.
See the table on the right for jumper
settings.
Jumper
Position
Pins 1-2
Pins 2-3
Definition
Enabled
Disabled
SCSI
Enable/Disable
Jumper Settings
(JPA1)