Supero SuperServer 5014C-M8, User Manual

Page: 55 / 110

Chapter 5: Advanced Motherboard Setup
5-19
System Power Force On
Jumper JPF allows you to enable or
disable the Force-Power-On func-
tion. If enabled, system power will
always stay on. If disabled, the
user needs to press the power but-
ton to power on the system.
Jumper
Position
Closed
Open
Definition
Force On
Disabled
System Power Force On
Jumper Settings
(JPF)
JLAN1/JLAN2 Enable/
Disable
Change the setting of jumper JPL1
to enable or disable the JLAN1
port and JPL2 to enable or disable
the JLAN2 port on the mother-
board. See the table on the right
for jumper settings. The default
setting is enabled.
Jumper
Position
Pins 1-2
Pins 2-3
Definition
Enabled
Disabled
JLAN1/JLAN2
Enable/Disable
Jumper Settings
(JPL1/JPL2)
Watch Dog Enable/Disable
JWD enables the Watch Dog func-
tion, a system monitor that takes
action when a software applica-
tion freezes the system. Jumping
pins 1-2 will have WD reboot the
s y s t e m i f a p r o g r a m f r e e z e s .
Jumping pins 2-3 will generate a
non-maskable interrupt for the pro-
gram that has frozen. See the
table on the right for jumper set-
tings. Watch Dog must also be en-
abled in BIOS.
Jumper
Position
Pins 1-2
Pins 2-3
Open
Definition
WD to Reset
WD to NMI
Disabled
Watch Dog
Jumper Settings (JWD)
Note: when Watch Dog is enabled, the user
must write their own application software to
disable the Watch Dog Timer.