Supero SUPERSERVER 5013G-6, User Manual

Page: 80 / 110

7-8
S
UPER
S
ERVER 5013G-6/5013G-i Manual
it begins to repeat the keystroke. The settings are: " 250 ", "500", "750"
and "1000."
APIC Mode
This setting allows you to Enable or Disable APIC. APIC is used to assign
interrupt signals to a specific processor on multi-processor system and
provides IRQs beyond the conventional 16 under Windows 2000 or XP. It
has no effect on single processor systems.
OS Select For DRAM > 64MB
This setting should be changed only if using OS2 and your system has more
than 64 MB of RAM. The options are "OS2" and " Non-OS2 ".
PWRON After PWR-Fail
This setting allows the user to specify how the system will respond when
power is reapplied after the system has gone down due to a power failure.
The options are " Off ", "On" and "Former-Sts".
Full Screen Logo Show
The options for this setting are "Enabled" and " Disabled ". This refers to
the logo that appears when your computer boots up.
Voice Warning Output
This setting allows you to turn the Voice BIOS on or off. Voice BIOS is a
new feature that gives you verbal (spoken) details of the POST (Power On
Self Test) routine that runs during system boot. This output is available in
several languages - use the Voice BIOS software (included on the CD that
came with the motherboard) to choose a different language. Remember,
you will need sound output enabled and set up to use this feature. See
Section 2-9 for more details. The options for this setting are " Enabled "
and "Disabled".