Supero SUPERSERVER 1027R-WC1R, User Manual

Page: 71 / 120

Chapter 5: Advanced Serverboard Setup
5-23
5-10 Onboard Indicators
LAN LEDs
The Ethernet ports (located beside the
VGA port) have two LEDs. On each
port, the yellow LED fl ashes to indi-
cate activity while the other LED may
be green, amber or off to indicate the
speed of the connection. See the table
on the right for the functions associ-
ated with the connection speed LED.
Onboard Power LED
An Onboard Power LED is located at
LED2. This LED Indicator is lit when
the system is on. Be sure to unplug the
power cord before removing or adding
any components. See the table on the
right for more details.
IPMI Dedicated LAN LEDs
An additional Dedicated IPMI LAN port
is also located on the I/O backplane.
The amber LED on the right indicates
activity, while the green LED on the
left indicates the speed of the connec-
tion. See the table at right for more
information.
Link LED Activity LED
IPMI LAN
BMC Heartbeat LED
A BMC Heartbeat LED is located
at DM1. When blinking, the BMC is
functioning normally.
BMC Heartbeat LED
LED Defi nition
DM1 Blinking: BMC: Normal
Onboard PWR LED Indicator
LED Color Defi nition
Off System Off (PWR cable
not connected)
Green System On
Green:
Flashing
Quickly ACPI S1 State
Activity LED Link LED
IPMI LAN Link LED (Left) &
Activity LED (Right)
LED Color/State Defi nition
Link (Left) Green: Solid
Amber: Solid 100 Mbps
1 Gbps
Activity
(Right) Amber: Blink-
ing Active
LAN 1/LAN 2 Link LED (Left)
LED State
LED Color Defi nition
Off 10 Mbps, 100 Mbps, or No
Connection
Green 10 Gbps (X10DRW-CTF-31
Only)
Amber 1 Gbps