Supero SUPERSERVER 1027R-WC1R User Manual Download Page 106

Page: 106 / 120

7-22

UPER

ERVER 1027R-WC1R/1027R-WC1RT User's Manual

Pending Operation:

This item displays the status of a pending operation.

Current Status Information:

This item displays the information regarding the

current TPM status.

TPM Enable Status

This item displays the status of TPM Support to indicate if TPM is currently

enabled or disabled.

TPM Active Status

This item displays the status of TPM Support to indicate if TPM is currently ac-

tive or deactivated.

TPM Owner Status

This item displays the status of TPM Ownership.



Intel TXT (LT-SX) Confi guration

Intel TXT (LT-SX) Hardware Support

This feature indicates if the following hardware components support the Intel

Trusted Execution Technology.

CPU

: TXT (Trusted Execution Technology) Feature

Chipset

: TXT (Trusted Execution Technology) Feature

Intel TXT (LT-SX) Confi guration

This feature displays the following TXT confi guration setting.

TXT (LT-SX) Support:

This item indicated if the Intel TXT support is enabled

or disabled.

Intel TXT (LT-SX) Dependencies

This feature displays the features that need to be enabled for the Intel Trusted

Execution Technology to work properly in the system.

VT-d Support

: Intel Virtualization Technology with Direct I/O support

VT Support

: Intel Virtualization Technology support

TPM Support

: Trusted Platform support

TPM State

: Trusted Platform state

Summary of Contents for SUPERSERVER 1027R-WC1R

























































































































Search results

Summary of Contents for SUPERSERVER 1027R-WC1R

Reviews:

Related manuals for SUPERSERVER 1027R-WC1R

Brands by name

Popular brands

Supero SUPERSERVER 1027R-WC1R, User Manual

Search results

Summary of Contents for SUPERSERVER 1027R-WC1R

Reviews:

Related manuals for SUPERSERVER 1027R-WC1R

Brands by name

Popular brands