Supero SuperServer 1012G-MTF User Manual Download Page 92

Page: 92 / 96

B-2

UPER

ERVER 1012G-MTF User's Manual

From the Windows XP/Windows 2003 Setup screen, press the <Enter> key.

The XP/2003 Setup will automatically load all device fi les and then, continue

the Windows XP/Windows 2003 installation.

After the Windows XP/Windows 2003 OS Installation has completed, the

10.

system will automatically reboot.

B-2 Installing Windows to a Non-RAID System

Insert Microsoft's Windows OS Setup CD in the CD-ROM drive and the

system will start booting up from the CD.

Continue with the installation. The Windows OS Setup screen will display.

From the Windows OS Setup screen, press the <Enter> key. The OS Setup

will automatically load all device fi les and then continue with the Windows

installation.

After the installation has completed, the system will automatically reboot.

Insert the Supermicro Setup CD that came with your system into the CD-

ROM drive during system boot and the main screen will display.

Summary of Contents for SuperServer 1012G-MTF

































































































Search results

Summary of Contents for SuperServer 1012G-MTF

Reviews:

Related manuals for SuperServer 1012G-MTF

Brands by name

Popular brands

Supero SuperServer 1012G-MTF, User Manual

Search results

Summary of Contents for SuperServer 1012G-MTF

Reviews:

Related manuals for SuperServer 1012G-MTF

Brands by name

Popular brands