Supero SuperServer 1012G-MTF, User Manual

Page: 3 / 96

Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperServer 1012G-MTF.
Installation and maintenance should be performed by experienced technicians
only.
The SuperServer 1012G-MTF is a 1U rackmount server based on the SC813MTS-
350CB server chassis and the Super H8SGL-F serverboard. Please refer to our
web site for updates on supported processors.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the Super H8SGL-F serverboard
and the SC813MTS-350CB chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 1012G-
MTF into a rack and check out the server confi guration prior to powering up the
system. If your server was ordered without the processor and memory components,
this chapter will refer you to the appropriate sections of the manual for their
installation.
Chapter 3: System Interface
Refer to this chapter for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: System Safety
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
SuperServer 1012G-MTF.
Chapter 5: Advanced Serverboard Setup
This chapter provides detailed information on the H8SGL-F serverboard, including
the locations and functions of connectors, headers and jumpers. Refer to this chapter
when adding or removing processors or main memory and when reconfi guring the
serverboard.
iii
Preface