Supero Supero X9DRFF User Manual Download Page 92

Page: 92 / 107

4-24

X9DRFF/X9DRFF-7 Motherboard User’s Manual

CPU

: TXT (Trusted Execution Technology) Feature

Chipset

: TXT (Trusted Execution Technology) Feature

Intel TXT (LT-SX) Configuration

This feature displays the following TXT configuration setting.

TXT (LT-SX) Support:

This item indicates if the Intel TXT support is enabled

or disabled. The default setting is

Disabled

Note

: Be sure to format your TPM module before enabling TXT (LT-SX)

support for this feature to work properly.

Intel TXT (LT-SX) Dependencies

For Trusted Execution Technology to work properly in the system, be sure to
enable the features displayed below.

VT-d Support

: Intel Virtualization Technology with Direct I/O support

VT Support

: Intel Virtualization Technology support

TPM Support

: Trusted Platform support

TPM State

: Trusted Platform state



ME Subsystem

This feature displays the following ME Subsystem Configuration settings.

•

ME BIOS Interface Version

•

ME Version

Summary of Contents for Supero X9DRFF












































































































Search results

Summary of Contents for Supero X9DRFF

Reviews:

Related manuals for Supero X9DRFF

Brands by name

Popular brands

Supero Supero X9DRFF, User Manual

Search results

Summary of Contents for Supero X9DRFF

Reviews:

Related manuals for Supero X9DRFF

Brands by name

Popular brands