Chapter 4: BIOS
4-17
View DMI Event Log
Highlight this item and press <Enter> to view the contents of the event log.
Event Logging
This setting allows you to
Enable
or Disable event logging.
ECC Event Logging
This setting allows you to
Enable
or Disable ECC event logging.
Mark DMI Events as Read
Highlight this item and press <Enter> to mark the DMI events as read.
Clear All DMI Event Logs
Select Yes and press <Enter> to clear all DMI event logs. The options are Yes
and
No
.
Console Redirection
Access the submenu to make changes to the following settings.
COM Port Address
This item allows you to specify which COM port to direct the remote console to:
Onboard COM A or Onboard COM B. This setting can also be
Disabled
.
BAUD Rate
This item allows you to set the BAUD rate for console redirection. The options are
300, 1200, 2400, 9600,
19.2K
, 38.4K, 57.6K, and 115.2K.
Console Type
This item allows you to set console redirection type. The options are VT100,
VT100/8bit, PC-ANSI/7bit,
PC ANSI
, VT100+, VT-UTF8 and ASCII.
Flow Control
This item allows you to select the flow control option for the console. The options
are: None, XON/XOFF, and
CTS/RTS
.
Console Connection
This item allows you to decide how console redirection is to be connected: either
Direct
or Via Modem.
Continue CR after POST
Select on to continue with console redirection after the POST routine. The options
are On and
Off
.
Summary of Contents for SUPERO X7SBi-LN4
