Supero SUPERO X7SBi-LN4, User Manual

Page: 74 / 97

4-16
X7SBi-LN4/X7SBi-LN4-TM User's Manual
Base I/O Address
This setting allows you to select the base I/O address for Serial Port B. The options
are 3F8,
2F8 , 3E8 and 2E8.
Interrupt
This setting allows you to select the IRQ (interrupt request) for Serial Port B. The
options are
IRQ3 and IRQ4.
Parallel Port
This setting allows you to decide how the parallel port will be controlled. The options
are
Enabled (user defined), Disabled and Auto (BIOS-or OS- controlled).
Base I/O Address
Select the base I/O address for the parallel port. The options are
378
, 278 and
3BC.
Interrupt
This setting allows you to select the IRQ (interrupt request) for the parallel port.
The options are IRQ5 and IRQ7 .
Mode
This feature allows you to specify the parallel port mode. The options are Output
only, Bi-Directional, EPP and
ECP .
DMA Channel
This item allows you to specify the DMA channel for the parallel port. The options
are DMA1 and
DMA3 .
Floppy Disk Controller
This setting allows you to decide how the floppy disk controller will be controlled.
The options are Enabled (user defined), Disabled, and Auto (BIOS and OS
controlled).

DMI Event Logging
Access the submenu to make changes to the following settings.
Event Log Validity
This is a display to inform you of the event log validity. It is not a setting.
Event Log Capacity
This is a display to inform you of the event log capacity. It is not a setting.