Supero Supero SUPERSERVER 5025B-4, User Manual

Page: 58 / 138

6-2
S
UPER
S
ERVER 5025B-4/5025B-T Manual
6-2 Control Panel
The control panel (located on the front of the chassis) must be connected to the
JF1 connector on the motherboard to provide you with system status indications. A
ribbon cable has bundled these wires together to simplify the connection. Connect
the cable from JF1 on the motherboard to the Control Panel PCB (printed circuit
board). Make sure the red wire plugs into pin 1 on both connectors. Pull all excess
cabling out of the airfl ow path.
The LEDs inform you of system status. See "Chapter 3: System Interface" for
details on the LEDs and the control panel buttons. Details on JF2 can be found in
the "Chapter 5: Advanced Motherboard Installation."
Figure 6-1. Chassis: Front and Rear Views
System Reset Main Power
Control Panel
SCSI/SATA Drives (6) 5.25" Drive Bay
Ethernet Ports
USB Ports
Keyboard/Mouse Ports
COM1 Port
7 Low Profi le PCI Slots
VGA Port
CD-ROM Drive (optional) Floppy Drive
Rear view