Supero Supero SUPERSERVER 5025B-4, User Manual

Page: 24 / 138

2-10
S
UPER
S
ERVER 5025B-4/5025B-T Manual
2-6 Checking the Drive Bay Setup
Next, you should check to make sure the peripheral drives and the SCSI/SATA
drives and backplanes have been properly installed and all connections have been
made.
Checking the Drives
All drives are accessable from the front of the server. For servicing the CD-
ROM and fl oppy drives, you will need to remove the top chassis cover. The
SCSI/SATA disk drives can be installed and removed from the front of the
chassis without removing the top chassis cover.
A slim CD-ROM and a fl oppy drive should be preinstalled in your server.
Refer to Chapter 6 if you need to reinstall a CD-ROM and/or fl oppy disk drive
to the system.
Depending upon your system's confi guration, your system may have one or
more drives already installed. If you need to install SCSI/SATA drives, please
refer to Chapter 6.
Checking the Airfl ow
Airfl ow is provided by four 8-cm fans. The system component layout was
carefully designed to direct suffi cient cooling airfl ow to the components that
generate the most heat.
Note that all power and data cables have been routed in such a way that they
do not block the airfl ow generated by the fans.
Supplying Power to the System
The last thing you must do is to provide input power to the system. Plug the
power cord from the power supply unit into a high-quality power strip that of-
fers protection from electrical noise and power surges.
It is recommended that you use an uninterruptible power supply (UPS).
1.
2.
3.
1.
2.
1.
2.