4-16
PDSMi-LN4 User's Manual
u
Console Redirection
COM Port Address
This item allows you to specify which COM port to direct the remote console to:
Onboard COM A or Onboard COM B. This setting can also be
Disabled
. Note: If
an IPMI card is installed, the default is COM B.
BAUD Rate
This item allows you to set the BAUD rate for console redirection. The options are
300, 1200, 2400, 9600,
19.2K
, 38.4K, 57.6K, and 115.2K.
Console Type
This item allows you to set console redirection type. The options are VT100,
VT100,8bit, PC-ANSI, 7bit, PC ANSI,
VT100+
,
VT-UTF8 and ASCII.
Flow Control
This item allows you to select the fl ow control option for the console. The options
are: None, XON/XOFF, and
CTS/RTS
.
Console Connection
This item allows you to decide how console redirection is to be connected: either
Direct
or Via Modem.
Continue CR after POST
Choose whether to continue with console redirection after the POST routine. The
options are On and
Off
. Note: the default is On if an IPMI card is installed.
u
Hardware Monitoring
