Chapter 1: Introduction
1-5
PDSMi-LN4 Quick Reference
J
umpers
Description
Default Setting
JBT1
CMOS Clear
See Section 2-7
JI
2
C1/JI
2
C2
I
2
C Bus to PCI Slots Enabled Open (Disabled)
JP3 (Note below)
Compact Flash Master/Slave Select (Closed: Master)
JPF
Power Force-On
Open (Disabled)
JPG1
VGA Enable
Pins 1-2 (Enabled)
JPL1/JPL2/JPL3/JPL4
Giga-bit LAN 1/2/3/4 Enable Pins 1-2 (Enabled)
JWD
Watch Dog Enable
P i n s 1 - 2 ( R e s e t )
Connector
Description
24-PIn ATX (JPW1) ATX 24-Pin Power Connector
8-Pin PWR (JPW2)
12V 8-pin PWR Connector
COM1(J31), COM2
COM Port 1 & COM 2 Header
DIMM#1A,#2A,#1B,#2B
Memory (DIMM) Slots (1 through 4)
Fans 1-6
System Fan Headers (Fans 1- 5), Fan6: CPU Fan
FP Control (JF1)
Front Panel Control Header
Floppy Connector (J27)
Floppy Disk Connector
IDE-Primary (J3)
IDE Primary Slot (Blue) (*Note 4 on Page 1-4)
IDE-Compact Flash (J4)
Compact Flash Card (White) (*Note 5 on Page 1-4)
IPMI
IPMI 2.0 Socket
J9
Speaker Connector (Pins 3-4:Internal,Pins 1-4:
External)
JL1
Chassis Intrusion Header
JLED
PWR LED Header
JPR1
Redundant PWR Alarm Reset
JWF1
Compact Flash Card PWR Connector (Note below)
KB/MS(J28)
PS/2 Keyboard/Mouse Connector
LAN1-LAN4 (JLAN1/2)
Ethernet RJ45 (Gigabit LAN) Port1-Port4 Connections
Printer (J30)
Parallel Port (Printer) Header
Power Fault (PW3)
Power Fault Header (*See Chapter 2)
SATA 1-4
4 Intel SATA Headers
Slot 1/Slot 6
PCI 32-bit 33 MHz (Slot 1)/PCI-X 133 MHz (Slot 6)
USB1/2 (J15)
Back Panel Universal Serial Bus Ports 1,2
USB3/4 (J45),USB5/6 (J46) Front Panel Accessible USB headers 3,4,5,6
VGA (JG1)
VGA Connector
WOL(WOL)
Wake On LAN header
WOR(JWOR)
Wake On Ring header
LED Indicator
Description (*(Refer to Addendum A)
LE 1
Onboard Standby PWR warning LED Indicator
LE3/LE4
BIOS POST Code Indicators
NICLED3/NICLED4 LED Indicators for GLAN Port 3/GLAN Port 4
Note
: For JP3 to work properly, you need to connect the Compact Flash Card PWR
Cable to JWF1 fi rst.
