Supero Supero PDSMA, User Manual

Page: 11 / 101

Chapter 1: Introduction
1-5
PDSMA Quick Reference (See Chapter 2 for details.)
Jumpers Description Default Setting
JBT1 CMOS Clear See Section 2-7
JP3 Compact Flash Master/Slave Closed (Master) (*Note 2)
JI2C1/JI2C2 SMbus to PCI Slot Open/Open (Disabled)
JPF Power Force-On Open (Disabled)
JPG1 VGA Enable Pins 1-2 (Enabled)
JPL1/JPL2 Giga-bit LAN 1/LAN 2 Enable Pins 1-2 (Enabled)
JWD Watch Dog Enable Pins 1-2 (Reset)
Connectors Description
24-PIn ATX (JPW1) ATX 24-Pin Power Connector
8-Pin PWR (JPW2) 12V 8-pin Power Connector (Required)
COM1(J31), COM2 COM Port 1 & COM 2 Header
DIMM#1A,#2A,#1B,#2B Memory (DIMM) Slots (1 through 4)
Fans 1-6 System Fan Headers (Fans 1-5), Fan6: CPU Fan
FP Control (JF1) Front Panel Control Header
Floppy Connector (J27) Floppy Disk Connector
GLAN1/2 (JLAN1/2) Ethernet RJ45 (Gigabit LAN) Port1/Port2 Connectors
IDE(J3)/Compact Flash (J4) J3: IDE Master/J4: Compact Flash Card*
IPMI IPMI 2.0 Socket
J9 Speaker Connector (Pins 3-4: Internal Buzzer, Pins 1-4:
External Speaker Cable)
JL1 Chassis Intrusion Header
JLED Power LED
JWF1 Compact Flash Card PWR Connector (*Note 2)
KB/MS (J28) PS/2 Keyboard/Mouse Connector
Printer (J30) Parallel Port (Printer) Header
Power Fault (PW3) Power Fault Header (*See Chapter 2)
SATA 0-3 (I-SATA 0-3) Intel SATA Headers: ISATA0-ISATA3
SPKR Internal Buzzer
Slot 1-Slot 5 PCI 32-bit 33MHz slots
Slot 6/Slot 7 PCI-X 64-bit 133MHz (Slot 6)/PCI-Exp x8 (Slot 7)
USB1/2 (J15) Back Panel Universal Serial Bus Ports 1,2
USB3/4 (J46),USB5/6 (J45) Front Panel Accessible USB headers 3,4,5,6
VGA (JG1) VGA Connector
WOL (WOL) Wake On LAN header
WOR (JWOR) Wake On Ring header
LED Indicator Description (*(Refer to Addendum A)
LE 1 Onboard Standby PWR warning LED Indicator
LE3/LE4 BIOS POST Code Indicators
*Notes : 1. J4 (the white slot) is reserved for Compact Flash Card only. Do not use it
for other devices. If J4 is populated with a Compact Flash Card, J3 (the blue slot) will
be available for one device only; if not, J3 can be used for multiple devices. 2. For
JP3 to work properly, you need to connect the CF card PWR cable to JWF1 fi rst.