Supero Supero H8DCE, User Manual

Page: 64 / 78

4-16
H8DCE User's Manual
Hardware Memory Hole
When "Enabled", allows software memory remapping around the memory
hole. Options are Enabled and Disabled. Note: this is only supported by
Rev E0 processors and above.
Node Interleaving
Use this setting to Enable or Disable node interleaving.
Rev E Settings
PwrDwnCtl
The options for the Power Down Control settings are Auto , Disabled,
Alternating, Same and Independant.
ECC Confi guration
DRAM ECC Enable
DRAM ECC allows hardware to report and correct memory errors automati-
cally. Options are Enabled and Disabled.
MCA DRAM ECC Logging
When Enabled, MCA DRAM ECC logging and reporting is enabled.
Options are Enabled and Disabled .
ECC Chipkill
Allows the user to enabled ECC Chipkill. Options are Enabled and
Disabled .
DRAM Scrub Redirect
Allows system to correct DRAM ECC errors immediately, even with
background scrubbing on. Options are Enabled and Disabled .
DRAM BG Scrub
Corrects memory errors so later reads are correct. Options are Dis-
abled and various times in nanoseconds and microseconds.