Supero Supero C7X99-OCE, User Manual

Page: 117 / 147

Chapter 4: AMI BIOS
4-43
Bootup Numlock State
This option sets the state to which the NumLock key is configured when
booting. The default is checked (Activated) .
Quiet Boot
This option sets the state to which the system buzzer is configured when
booting. The default is checked (On), the buzzer is silent.
AddOn ROM Display Mode
This item sets the display mode for the Option ROM. Select Keep Current
to use the current AddOn ROM Display setting. Select Force BIOS to use
the Option ROM display mode set by the system BIOS. The options are
Force BIOS and Keep Current.
Wait for "F1" for Error
This option sets whether the system will wait for the user to press "F1"
when an error is detected during POST. The default is
checked (On) .
Interrupt 19 Capture
Interrupt 19 is the software interrupt that handles the boot disk function.
When this item is set to Enabled, the ROM BIOS of the host adaptors will
"capture" Interrupt 19 at bootup and allow the drives that are attached
to these host adaptors to function as bootable disks. If this item is set
to Disabled, the ROM BIOS of the host adaptors will not capture Inter-
rupt 19, and the drives attached to these adaptors will not function as
bootable devices. The options are
Enabled and Disabled.
Retry Boot
Select Enabled to force the system to reboot when system fails to boot.
The options are
Disabled and Enabled.
Watch Dog Function
If enabled, the Watch Dog timer will allow the system to reboot when it is
unresponsive for more than 5 minutes. The default is
unchecked (Off) .
Power Button Function
This feature controls how the system shuts down when the power but-
ton is pressed. Select 4 Seconds Override for the user to power off the
system after pressing and holding the power button for 4 seconds or
longer. Select Instant Off to instantly power off the system as soon as
the user presses the power button. The options are
Instant Off , and 4
Seconds Override.