Supero Supero C7X99-OCE, User Manual

Page: 130 / 147

4-56
Supermicro C7X99-OCE/C7X99-OCE-F Motherboard User’s Manual
to map Unicode characters into one or more bytes. The options are
ANSI, VT100, VT100+, and
VT-UTF8 .
Bits Per Second
This item sets the transmission speed for a serial port used in Con-
sole Redirection. Make sure that the same speed is used in both host
computer and the client computer. A lower transmission speed may
be required for long and busy lines. The options are 9600, 19200,
57600, and
115200 (bits per second).
Flow Control
Use this item to set the flow control for Console Redirection to pre -
vent data loss caused by buffer overflow. Send a "Stop" signal to stop
data-sending when the receiving buffer is full. Send a "Start" signal
to start data-sending when the receiving buffer is empty. The options
are
None, Hardware RTS/CTS, and Software Xon/Xoff.
The setting for each these features is displayed:
Data Bits, Parity, Stop Bits