Supero SUPER PIIIDM3, User Manual

Page: 79 / 98

Chapter 4: BIOS
4-19
BIOS
data transfer driven by the host device. Use
ECP
(Extended
Capabilities Port) to achieve data transfer rates of up to 2.5 Mbps.
ECP uses the DMA protocol and provides symmetric bidirectional
communication.
Note: The Optimal default setting for this
option is ECP and the Fail-Safe setting is Normal .
EPP Version
The settings are Enabled and Disabled . Note: The Optimal and
Fail-Safe default settings are N/A.
Parallel Port IRQ
This option specifies the IRQ to be used by the parallel port. The
settings are 5 and 7 .
Parallel Port ECP DMA Channel
This option is only available if the setting of the parallel port mode
option is
ECP
. The settings are
0
,
1
,
2
,
3
,
5
,
6
and
7
.
Onboard MIDI Port
This option specifies the base address to be used for the MIDI port. The
settings are Disabled, 300h and 330h .
MIDI IRQ
This option specifies the IRQ to be used for the parallel port. The
settings are 5, 7, 9 and 10 .
Onboard Game Port
This option is used to either
Enable
or
Disable
the Game Port.
Auto-Detect Hard Disks
This section allows BIOS to look for and configure any hard disk drives on
your system. After highlighting this option, hit <Enter> and wait momentarily
while BIOS performs the auto-detect. You will soon see the disk drives
appear properly configured.
Change User Password
Change Supervisor Password