Supero SUPER P6DGE, User'S And Bios Manual

Page: 78 / 98

BIOS User's Manual
5-18
must be removed from the pool, the end user can use these options to
reserve the IRQ by assigning an ISA/EISA setting to it. Onboard I/O is
configured by AMIBIOS. All IRQs used by onboard I/O are configured as
PCI/PnP.
IRQ14 and 15 will not be available if the onboard PCI IDE is enabled. If all
IRQs are set to ISA/EISA and IRQ14 and 15 are allocated to the onboard
PCI IDE, IRQ 9 will still be available for PCI and PnP devices. This is
because at least one IRQ must be available for PCI and PnP devices. The
settings are PCI/PnP or ISA/EISA.
Reserved Memory Size
This option specifies the size of the memory area reserved for legacy
ISA adapter cards. The settings are Disabled, 16K, 32K or 64K.
Reserved Memory Address
This option specifies the beginning address (in hex) of the reserved
memory area. The specified ROM memory area is reserved for use by
legacy ISA adapter cards. The settings are C0000, C4000, C8000,
CC000, D0000, D4000, D8000 or DC000.
5-1-6 Peripheral Setup
On-board SCSI
The settings for this option are Enabled or Disabled. When set to
Enable this option enables the Adaptec 7895 BIOS on the P6DGS
motherboard or the Adaptec 7890 on the P6DGU/P6SGU motherboards.
Remote Power On
Microsoft's Memphis OS supports this feature which can wake-up the
system from SoftOff state through devices (such as an external modem)
that are connected to COM1 or COM2. The settings are Disabled or
Enabled.
CPU Current Temperature
The current CPU temperature is displayed in this option.
CPU Overheat Warning
The settings for this option are Enabled or Disabled. When set to
Enabled this option allows the user to set an overheat warning tempera-
ture.