Supero SUPER P4SCA, User Manual

Page: 35 / 92

Chapter 2: Installation
2-11
Wake-On-Ring
The Wake-On-Ring header is desig-
nated WOR. This function allows your
computer to receive and be "awak-
ened" by an incoming call when in the
suspend state. See the table on the
right for pin definitions. You must also
have a WOR card and cable to use
WOR.
SATA LED
The SATA LED header is located
at J37. This header will display all
SATA activities. See the table on
the right for pin definitions.
Pin
Number
1
2
Definition
Ground
W ake-up
Wake-On-Ring Pin
Definitions (WOR)
SATA LED
Pin Definitions
(J37)
Pin
Number
1
2
3
4
5
Definition
SATA1
SATA2
NC
NC
NC
Keylock Enabled/Disabled
The Keylock header is located at
J36. Close Pin 1 and Pin 2 of J36
to enable the function of Keylock.
The default setting is "Open". See
the table on the right for pin defini-
tions.
Pin
Definitions
1 & 2 (closed)
1 & 2 (Open)
Function
Enabled
Disabled
Keylock Enabled/Disabled
(J36) Pin Definitions