Supero SUPER P4DE8, User Manual

Page: 40 / 86

2-16
S
UPER P4DE8/P4DEI/P4DEE User’s Manual
LAN2 Enable/Disable
Change the setting of jumper JPL2
to enable or disable the LAN2 port
on the motherboard. See the table
on the right for jumper settings.
The default setting is Enabled.
Ju m p e r
P o sitio n
P in s 1 -2
P in s 2 -3
D e fin itio n
E n a b le d
D isa b le d
L A N 2
E n a b le /D is a b le
J u m p e r S e tting s
(J P L 2 )
SCSI Enable/Disable
(P4DE8 only)
The SCSI Enable/Disable jumper at
JPA3 allows you to enable or dis-
able the onboard SCSI. The nor-
mal (default) position is on pins 1-
2 to enable SCSI. See the table on
the right for jumper settings.
Ju m p e r
P o sitio n
P in s 1 -2
P in s 2 -3
D e fin itio n
E n a b le d
D isa b le d
S C S I E n a b le /D is a b le
J u m p e r S e tting s
(J P A 3 )
SCSI Termination Enable/
Disable (P4DE8)
Jumpers JPA1 and JPA2 allow you
to enable or disable termination for
the SCSI connectors. Jumper JPA1
controls SCSI channel A and JPA2
is for SCSI channel B. The normal
(default) setting is open to enable
(teminate) both SCSI channels. See
the table on the right for jumper set-
tings.
Ju m p e r
P o sitio n
O p e n
C lo se d
D e fin itio n
E n a b le d
D isa b le d
S C S I C h a n n e l T e rm in a tio n
E n a b le /D is a b le
J u m p e r S e tting s
(J P A 1 , J P A 2 )