Supero SUPER P3TDE6, User Manual

Page: 42 / 90

2-18
S
UPER P3TDE6/P3TDER User’s Manual
BIOS Select (P3TDE6 only)
Jumper JP57 allows you to select either BIOS
chip 1 or BIOS chip 2 to boot the system with.
The default position is on pins 1 and 2 to se-
lect BIOS 1. See the table on the right for
jumper settings.
Ju m p e r
P o sitio n
1 -2
2 -3
D e fin itio n
B IO S 1
B IO S 2
B IO S S e le c t
J u m p e r S e tting s (J P 5 7 )
PCI 66/33 MHz Select (P3TDE6 only)
Jumper JP61 allows you to set the two 3V
PCI-64 slots on the P3TDE6 to run at either 66
or 33 MHz. The default position is open to
enable 66 MHz operation. See the table on
the right for jumper settings.
Ju m p e r
P o sitio n
O p e n
C lo se d
D e fin itio n
6 6 M H z
3 3 M H z
P C I 6 6 /3 3 M H z S e le c t
J u m p e r S e tting s (J P 6 1 )
Thermal Fan Enable/Disable
JP62 (P3TDE6) and JP65 (P3TDER) allow you
to enable or disable continuous operation of
the thermal fan. The default position is open
to disable operation. See the table on the
right for jumper settings.
Ju m p e r
P o sitio n
O p e n
C lo se d
D e fin itio n
D isa b le d
E n a b le d
T h e rm a l F a n E n a b le /
D is a b le J u m p e r S e ttin g s
(J P 6 2 , J P 6 5 )
CPU/CPU Chassis Fan Select
JP65 (P3TDE6) and JP72 (P3TDER) allow you
to select to use either the CPU fan or the CPU
Chassis fan. The default position is closed to
select the CPU fan. See the table on the right
for jumper settings.
Ju m p e r
P o sitio n
O p e n
C lo se d
D e fin itio n
C P U C h a ssis
C P U
C P U /C P U C h as s is F a n
S e le c t J u m p e r S e ttin g s
(J P 6 5 , J P 7 2 )
VGA Enable/Disable (P3TDER only)
JP68 allows you to enable or disable the VGA
port. The default position is on pins 1 and 2
to enable VGA. See the table on the right for
jumper settings.
Ju m p e r
P o sitio n
1 -2
2 -3
D e fin itio n
E n a b le d
D isa b le d
V G A E n a b le /D is a b le
J u m p e r S e tting s
(J P 6 8 )