Supero SUPER P3TDE6, User Manual

Page: 40 / 90

2-16
S
UPER P3TDE6/P3TDER User’s Manual
Onboard LAN/NIC
Enable/Disable
P3TDE6: Jumper JP58 only
P3TDER: Jumpers JP58 & JP62
Change the setting of jumper JP58/
J P 6 2 t o e n a b l e o r d i s a b l e t h e
onboard LAN or NIC (Network In-
terface Card) on the motherboard.
S e e t h e t a b l e o n t h e r i g h t f o r
jumper settings. The default set-
ting is open.
SpeakerEnable/Disable
Y o u m a y w a n t t o d i s a b l e t h e
onboard speaker. Jumper JP56
gives you this option. See the
table on the right for jumper set-
tings.
Ju m p e r
P o sitio n
O p e n
C lo se d
D e fin itio n
D isa b le d
E n a b le d
S p e a k e r E n a b le /D is a b le
J u m p e r S e tting s (J P 5 6 )
Ju m p e r
P o sitio n
O p e n
C lo se d
D e fin itio n
E n a b le d
D isa b le d
O n b o a rd L A N 1 /L A N 2
E n a b le /D is a b le
J u m p e r S e tting s
(J P 5 8 & J P 6 2 )
Third Power Supply Failure
Alarm Enable/Disable
(P3TDE6 only)
This feature is for Supermicro Hot-
S w a p T r i p l e R e d u n d a n t P o w e r
Supplies only. When enabled, the
system will notify you in the event
of a power supply failure. This
feature assumes that three power
supply units are installed in the
c h a s s i s , w i t h o n e a c t i n g a s a
backup. If you only have one or
two power supply units installed,
you should disable this with JP55
to prevent false alarms. See the
table on the right for jumper set-
tings.
Ju m p e r
P o sitio n
O p e n
C lo se d
D e fin itio n
D isa b le d
E n a b le d
P o w e r S u p p ly F a ilu re
A la rm E n a b le /D is a b le
J u m p e r S e tting s (J P 5 5 )