Supero SUPER 370DL3, User Manual

Page: 46 / 94

2-14
S
UPER S2DL3/370DL6/370DL3/370DLE User's Manual
Installation
Power Supply Fail Header
Connect a cable from your power
supply to the header at JP11 to
provide warning of power supply
failure. This warning signal is
passed through the PWR_LED pin
on JL1 to provide indication of a
p o w e r f a i l u r e o n t h e c h a s s i s .
This feature is only available when
using Supermicro power supplies.
See Table 2-20 for pin definitions.
Table 2-20
Power Supply Fail Header Pin Definitions
(JP11)
Pin
N u m b e r
1
2
3
4
Definition
P/S 1 Fail Signal
P/S 2 Fail Signal
P/S 3 Fail Signal
Reset (from MB)
SLED1 (SCSI LED)
Indicator (not on 370DLE)
The SLED connector is used to
provide an LED indication of SCSI
activity. Refer to Table 2-21 for
connecting the SCSI LED.
1
Pin
N u m b e r
1
2
3
4
Definition
Positive
N e g a t i v e
N e g a t i v e
Positive
Table 2-21
SLED1 Pin Definitions