Supero SUPER 370DL3, User Manual

Page: 17 / 94

Chapter 1: Introduction
1-9
Introduction
S2DL3 Quick Reference
Jumpers Description Default Setting
JA2 SCSI Term. (p. 2-17) Open (Enabled)
JA3 SCSI Term. (p. 2-17) Open (Enabled)
JBT1 CMOS Clear (p. 2-16) Pin 1-2 (Normal)
JP2 Front Side Bus Speed (p. 2-16) Pin 1-2 (CPU Select)
JP4 Manufacturer's Setting Open
JP7 Overheat Alarm (p. 2-17) Closed (Enabled)
JP8 LAN Enable/Disable (p. 2-17) Open (Enabled)
JP12 3rd P/S Failure Alarm (p. 2-18) Open (Disabled)
JP13 Speed for 64-bit PCI
Open (66 MHz)
DIP Switches Description Default Setting
SW1 (1-4) CPU Core/Bus Ratio (see p. 2-15)
SW2 Manufacturer's Setting (Open)
Connectors Description
BANK0-BANK3 Memory (RAM) Slots (p. 2-6)
CHASSIS FAN (4 ea) Chassis Fan Header (p. 2-12)
COM1/COM2
COM1/COM2 Serial Port Connector (p. 2-12)
CF1/CF2 CPU1/CPU2 Fan Header (p. 2-12)
CF3 Thermal Control Fan Header (p. 2-12)
J23, J24 IDE Hard Disk Drive Connectors (p. 2-19)
J26 Floppy Disk Drive Connector (p. 2-19)
J27 Parallel Printer Port (p. 2-18)
J28 PS/2 Keyboard/Mouse (p. 2-12)
J104 Ethernet Port
JA1 Ultra160 LVD SCSI Connector (p. 2-21)
JA4 Ultra Wide SCSI Connector (p. 2-20)
JA5 Ultra SCSI Connector (p. 2-20)
JF1 Front Control Panel (p. 2-7)
JP11 Power Supply Fail Header (p. 2-14)
P1 Primary ATX Power Connector (p. 2-9)
P2 Primary ATX Power Connector (p. 2-9)
PWR_SEC Secondary ATX Power Connector (p. 2-9)
SLED1 SCSI LED header (p. 2-14)
U38 Universal Serial Bus Ports (p. 2-13)
USB4 (J105) Extra USB Header(p.2-13) WOL
WOL Wake-on-LAN Header (p. 2-13)
WOM
Wake-on-Modem Header (p. 2-13)