Supero SC836E1 - R800V(B) User Manual Download Page 3

Page: 3 / 122

iii

Preface

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SC836 3U chassis. Installa-

tion and maintenance should be performed by experienced technicians only.

Supermicro’s SC836 3U chassis features a unique and highly-optimized design for

dual-core Xeon platforms. The chassis is equipped with a redundant 800W high

ciency power supply. High performance fans provide ample optimized cooling for

B-

IMM memory modules and 16 hot-swap drive bays offers ma

imum storage

capacity in a 3U form factor.

This document lists compatible parts available when this document was published.

Always refer to the our

eb site for updates on supported parts and con

gura-

tions.

Summary of Contents for SC836E1 - R800V(B)



























































































































Search results

Summary of Contents for SC836E1 - R800V(B)

Reviews:

Related manuals for SC836E1 - R800V(B)

Brands by name

Popular brands

Supero SC836E1 - R800V(B), User Manual

Search results

Summary of Contents for SC836E1 - R800V(B)

Reviews:

Related manuals for SC836E1 - R800V(B)

Brands by name

Popular brands