Supero SC819 Series, User Manual

Page: 50 / 80

SC819 Chassis Manual
5-10
Installing an Expansion Card
1. Power down the system, remove the power cords from the rear of the power
supplies and remove the chassis cover as described in Section 5-3. Con-
firm that you have the correct riser card for your chassis model and that the
expansion card includes a standard PCI slot bracket.
2. Install the expansion card by sliding the riser card into the appropriate slot
in the motherboard and secure it using one of the two methods illustrated
above. For more information, see the installation instructions included with the
riser card.
3. Choose the PCI slot in which to place the expansion card.
4. In that slot, open the PCI slot lever and slide the PCI slot cover sideways.
5. From inside the chassis, remove the PCI slot cover.
6. Insert the expansion card card into the riser card and slide the expansion
card bracket into the PCI slot bracket.
7. Secure the expansion card in the PCI slot by closing the PCI slot lever.
8. Connect cables to the expansion card as necessary.
Figure 5-11: Installing a Riser Card
UIO
Riser
Card
WIO
Riser
Card