5-17
Chapter 5: Chassis Setup and Maintenance
Figure 5-12: Removing the Power Supply
Installing the Power Supply
Disconnect the chassis and replacement power supply from any power
source.
Place the power supply bracket on the rear of the power supply
Use the power supply bracket screws previously set aside to attache the
power supply bracket to the rear of the power supply.
Gently push the new power supply module into the power bay until it clicks
into the locked position.
Insert the mounting screws up through the bottom of the chassis and into the
power supply.
Plug the AC power cord back into the module and power up the server.
1.
2.
3.
4.
5.
6.
5
Mounting Screws
Power Supply
Bracket Screws
Power Supply
Bracket
3
2
4
