5-7
Chapter 5: Chassis Setup and Maintenance
Figure 5-6: I/O Removing the DVD or CD-ROM
5-6 Removing and Installing the DVD or CD-ROM
Prior to installing the motherboard, the DVD or CD-ROM must be removed, then
reinstalled after the motherboard has been installed in the chassis.
4
Mounting Screws
Removing the DVD or CD-ROM Drive
Locate and remove the screws holding the DVD-ROM in place, setting aside
the screws for later use.
If necessary, disconnect any cables to the DVD-ROM and comport tray.
Slide the DVD-ROM and comport tray toward the rear of the chassis.
Lift the DVD-ROM and comport tray free from the chassis.
Installing the DVD or CD-ROM Drive
Carefully slide the DVD or CD-ROM and comport tray into the opening in the
front of the chassis.
Secure the drive with the screws previously set aside and reattach the wiring.
1.
2.
3.
4.
1.
2.
3
