SC523 Chassis Manual
5-6
Figure 5-5: Removing the Hard Drive from the Drive Tray
Drive Tray
Mounting Screws
Hard Drive
Remove the mounting screws holding the hard drive into the hard drive tray
and set them aside for later use.
Carefully remove the hard drive from the hard drive tray.
Installing a Hard Drive into the Hard Drive Tray
Install a new hard drive into the hard drive tray with the printed circuit board
side facing down so that the mounting holes align with those in the carrier.
Using the screws which were set aside earlier, secure the hard drive into the
hard drive tray by tightening all four screws.
Carefully lower the hard drive tray and hard drive into the chassis.
Secure the hard drive tray to the chassis using the screws set aside earlier.
Reconnect the wiring to the hard drive.
6.
7.
1.
2.
3.
4.
5.
7
6
6