5-5
Chapter 5 Chassis Setup and Maintenance
5-4 DVD-ROM Drive Installation
The SC119 chassis models support an optional DVD-ROM and include a black
DVD dummy drive.
Installing or Replacing a DVD-ROM Drive
1. Power down the system, remove the AC power cords from the rear of the
power supplies. Remove the chassis cover as described in Section 5-2. If
necessary, remove the server from the rack, remove the DVD backplane
screw and pull the DVD-ROM backplane from the rear of the DVD-ROM
drive.
2. Unplug the drive's power and data cables from the motherboard and/or back-
plane.
3. Unlock the mini-bezel lock scew and remove the mini-bezel from the drive
bay. The bezel can be removed by pulling out the hard drive beneath the
DVD-ROM, then pulling the mini-bezel forward.
4. When installing or removing a DVD-ROM drive, the mini-bezel lock screw
must be removed and the drive tray completely seperated from the chassis.
5. Remove the DVD-ROM or dummy drive from the drive tray by removing the
drive screws, then secure the replacement DVD-ROM into the drive tray, us-
ing the drive screws.
Figure 5-4: Installing the DVD-ROM Drive
Mini-Bezel
Lock Screw
DVD Dummy
Tray
Drive
Screw
DVD Backplane
Screw
Drive
Screws
Summary of Contents for SC119 Series
