Supero SC119 Series, User Manual

Page: 37 / 81

4-3
Chapter 4 System Interface
4-3 Control Panel LEDs
The control panel located on the front of the SC119 chassis has five LEDs. These
LEDs provide critical information related to different parts of the system. This sec-
tion explains what each LED indicates when illuminated and any action that may
be required.
Power: Indicates power is being supplied to the system's power supply units. This
LED should normally be illuminated when the system is operating.
HDD: Indicates IDE channel activity, SAS/SATA drive, and/or DVD-ROM drive
activity when flashing.
NIC1: Indicates network activity on GLAN1 when flashing.
NIC2: Indicates network activity on GLAN2 when flashing.
Informational LED
Status Description
Solid red
An overheat condition has occured.
(This may be caused by cable congestion).
Blinking red (1Hz) Fan failure, check for an inoperative fan.
Blinking red (0.25Hz)
Power failure, check for a non-operational
power supply.
Solid blue
Local UID has been activated. Use this
function to locate the server in a rack
mount environment.
Blinking blue
Remote UID is on. Use this function to
identify the server from a remote location.