Supero P4DCE Plus II, User Manual

Page: 40 / 95

2-14
S
UPER P4DC6/P4DC6+/P4DC6+II/P4DCE/P4DCE+/P4DCE+II User's Manual
2-7 Jumper Settings
Explanation of
Jumpers
To modify the operation of the
motherboard, jumpers can be used
to choose between optional set-
tings. Jumpers create shorts be-
tween two pins to change the func-
tion of the connector they are lo-
cated on. Pin 1 isalways identi-
fied with a square solder pad on
the printed circuit board. See the
m o t h e r b o a r d l a y o u t p a g e s f o r
jumper locations.
C o n n e c t o r
P i n s
J u m p e r
C a p
Setting
Pin 1-2 short
3 2 1
3 2 1
Wake-On-Ring
The Wake-On-Ring header is desig-
nated as JWOR on the P4DC6/P4DC6+/
P4DC6+II/P4DCE/P4DCE+/P4DCE+II.
This function allows your computer to
receive and be "awakened" by an in-
coming call when in the suspend state.
Refer to Table 2-24 for pin definitions.
You must also have a WOR card and
cable to use WOR.
P in
N u m b er
1
2
D e fin ition
G ro u n d
W a ke -up
T a b le 2-2 4
W a k e -O n -R in g P in
D e fin itio n s (J W O R )