Supero MBD-X10SRA-F-O, User Manual

Page: 130 / 135

C-2
Supermicro X10SRA/X10SRA-F Motherboard User’s Manual
C-3 To Recover the Main BIOS Block Using a USB-
Attached Device
This feature allows the user to recover a BIOS image using a USB-
attached device without additional utilities used. A USB flash device such
as a USB Flash Drive, or a USB CD/DVD ROM/RW device can be used for
this purpose. However, a USB Hard Disk drive cannot be used for BIOS
recovery at this time.
The file system supported by UEFI is FAT (including FAT12, FAT16, and
FAT32) installed on a bootable or non-bootable USB-attached device.
However, the BIOS might need several minutes to locate the SUPER.
ROM file if the media size becomes too large because it contains too
many folders and files.
To perform UEFI BIOS recovery using a USB-attached device, follow the
instructions below.
1. Using a different machine, copy the "Super.ROM" binary image file into the
disc Root "\" Directory of a USB device or a writeable CD/DVD.
Note: If you cannot locate the "SUPER.ROM" file in your driver
disk, visit our website at www.supermicro.com to download the
BIOS image into a USB flash device (save in the root folder) and
rename it "SUPER.ROM" for BIOS recovery use.
2. Insert the USB device that contains the new BIOS image ("SUPER.ROM")
into any available USB port Be sure the file is saved in the very top (root)
folder.
3. Set the JBR1 switch on the motherboard to recovery mode and power on the
system. If the screen appears as below, press <DEL> to continue.