4-10
H8SSL-i2 User's Manual
Advanced Chipset Control
NorthBridge Confi guration
Memory Confi guration
Memclock Mode
This setting determines how the memory clock is set.
Auto
has the memory
clock set by the code and Limit allows the user to set a standard value.
MCT Timing Mode
Sets the timing mode for memory. Options are
Auto
and Manual.
Bank Interleaving
This setting is used to determine whether bank interleaving is to be employed.
The options are
Auto
and Disabled.
Enable Clock to All DIMMs
This setting allows the user to enable unused clocks to DIMMs, even if DIMM
slots are empty. Options are Enabled and
Disabled
.
Mem Clk Tristate C3/ALTVID
Use this setting to Enable or
Disable
memory clock tristate during C3 and ALT
VID.
Remapping Memory Hole
When "Enabled", allows software memory remapping around the memory hole
(only supported by rev. E0 processors and above). Options are Enabled and
Disabled
.
Power Down Control
Allows DIMMs to enter power down mode by deasserting the clock enable signal
when DIMMs are not in use. Options are
Auto
and Disabled.
Alternate VID
Specify the alternate VID while in low power states. Options are various voltages
from .8V to 1.050V in increments of .025V. Default setting is
0.850V
.
