2-14
H8SSL-i2 User's Manual
Onboard Speaker Enable/
Disable
The JD1 header allows you to use
either an external speaker or the
internal (onboard) speaker. To use
the internal (onboard) speaker, close
pins 6 and 7 with a jumper. To use an
external speaker, connect the speaker
wires to pins 4 through 7 of JD1. See
the table on the right for settings and
the table associated with the Power
LED/Speaker connection (previous
section) for pin defi nitions.
Onboard Speaker Enable/Disable
Pin Defi nitions (JD1)
Pins Defi nition
6-7
Jump for onboard speaker
4-7
Attach external speaker wires
VGA Enable/Disable
JPG1 allows you to enable or disable
the VGA port. The default position is
on pins 1 and 2 to enable VGA. See
the table on the right for jumper set-
tings.
VGA Enable/Disable
Jumper Settings (JPG1)
Jumper Setting Defi nition
Pins 1-2
Enabled
Pins 2-3
Disabled
LAN Enable/Disable
Change the setting of jumper JPL to
enable or disable the LAN1 and LAN2
Gb Ethernet ports. See the table on
the right for jumper settings. The
default setting is enabled.
JLAN1/2 Enable/Disable
Jumper Settings (JPL)
Jumper Setting Defi nition
Pins 1-2
Enabled
Pins 2-3
Disabled
PCI-X Slot Speed
Jumper JPX1A can be used to change
the speed of PCI-X slot #6. See the
table on the right for jumper settings.
PCI-X Slot Speed Jumper Settings
(JPX1A)
Jumper Setting Defi nition
Open
Auto
Pins 1-2
PCI-X 66 MHz
Pins 2-3
PCI 66 MHz
