Supero H8SCM, User Manual

Page: 35 / 82

Chapter 2: Installation
2-15
SGPIO
The T-SGPIO1/ T-SGPIO2 (Serial
G e n e r a l P u r p o s e I n p u t / O u t p u t )
headers provide a bus between the
SATA controller and the backpane to
provide SATA enclosure management
functions. Connect the appropriate
cable from the backplane to the
T-SGPIO1 header to utilize SATA
management functions on your system.
SGPIO Header Pin Defi nitions
(T-SGPIO1/TSGPIO2)
Pin# Defi nition Pin # Defi nition
1 NC 2 NC
3 Ground 4 Data
5 Load 6 Ground
7 NC 8 NC
Note: NC indicates no connection.
Trusted Platform Module Header
The JLPC1 header is used to connect
a Trusted Platform Module (TPM),
available separately from a third-party
vendor. A TPM is a security device that
allows encryption and authentication of
hard drives, disallowing access if the
TPM associated with it is not installed
in the system. See the table on the
right for pin defi nitions.
Trusted Platform Module Header
Pin Defi nitions (JLPC1 )
Pin# Defi nition Pin# Defi nition
1 LCLK 2 GND
3 LFRAME 4 No Pin
5 LRESET 6 VCC5
7 LAD3 8 LAD2
9 VCC3 10 LAD1
11 LAD0 12 GND
13 RSV0 14 RSV1
15 SB3V 16 SERIRQ
17 GND 18 CLKRUN
19 LPCPD 20 RSV2
Power SMB (I
2
C) Connector
The Power System Management Bus
(
I2
C) connector (JPI
2
C1) monitors
the power suppply, fan and system
temperatures. See the table on the
right for pin defi nitions.
Power SMB
Pin Defi nitions
(JPI2C1)
Pin# Defi nition
1 Clock
2 Data
3 PWR Fail
4 Ground
5 +3.3V