manualshive.com logo in svg

Supero H8SCM, User Manual

Share
Download
Supero H8SCM User Manual Download Page 60

4-4

H8SCM(-F) SERVERBOARD USER'S MANUAL

GART Error Reporting

This option should remain disabled for normal operation. The driver developer 

may enable this option for testing purposes. Options are Enabled or 

Disabled

.

Microcode Update

This setting 

Enables

 or Disables microcode updating.

Secure Virtual Machine Mode

This setting is used to 

Enable

 or Disable SVM.

Power Now

This setting is used to 

Enable

 or Disable the AMD Power Now feature.

Power Cap

This option can decide the highest P-state in the OS. Options include 

P-state 

0 

through P-state 4.

ACPI SRAT Table

This option 

Enables

 or Disables the building of the ACPI SRAT Table.

CPU Down Core Mode

This option sets down core support for the CPU. Options include 

Disabled

, 1 

Core through 

n 

Cores in odd numbered increments. The value 

n

 is depend on 

the core per CPU node.

C1E Support

This option specifi es C1E support. Options include 

Enabled

 and Disabled.

Clock Speed Spectrum

This option enables or 

disables

 spread spectrum modulation.

Summary of Contents for H8SCM



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands